We were contracted to replace flashboards and perform apron scour repairs at a hydroelectric dam along the Rock River in the Upper Midwest. Our client is a privately owned entity that owns and operates 80+ hydroelectric facilities throughout the United States.

The project’s significant goals involved increasing the dam’s retainage capacity, protecting the existing spillway structure, and providing an aesthetically pleasing spillway for the community's residents. This project was scheduled for the summer months when flow rates are at their lowest, mainly due to the volatility of the Rock River and the need for a slow-moving current to keep our divers safe. 

We're at Minnesota Power's hydroelectric dam in Scanlon, Minnesota, to replace 7 of the structure's Tainter gates. Extending the life of this renewable energy source by 50 to 100 years, the Scanlon Dam Gate Replacement Project enables the further creation of clean, renewable power provided to local communities. 

We were pulled into the project very early on during the design phase of the project. Both Nelosca and Minnesota Power attribute the project's success to early contractor involvement.

We are at the Lock and Dam 19 facility in Keokuk, Iowa, operated by the U.S. Army Corps of Engineers (USACE). Our team replaced an 18,000-LB, 105-FT underwater soundbar with wet-mateable connections (cables and speakers that can be connected and disconnected underwater). This underwater acoustic deterrent system (UADS) upgrade allows divers to replace individual speakers if underperforming rather than continuing to remove the entire system.

Why? The U.S. Geological Survey (USGS) is spearheading a 3-year study to reduce the number of invasive carp moving toward the Great Lakes. It is the only study on the Mississippi River evaluating a deterrent for invasive carp. 

This year, Nelosca's blog posts garnered an impressive readership of over 27,000. An analysis of our most searched topics identified the most significant issues in the environmental and marine construction industries, including those most relevant to our company's operations. This leads us to the question: What were our industry's most frequently researched topics?

We've examined Nelosca's most popular articles of the year -- let's count them down!

ROV stands for remotely operated vehicle. They are highly maneuverable unoccupied machines used to observe and work underwater, often in areas that are deemed too dangerous for commercial divers. ROV pilots can operate them from a nearby shore or boat.

Remotely operated vehicles are versatile tools commonly used in our industry to inspect, monitor underwater structures, and perform complex work tasks in depths divers cannot access. Although, more recreational ROVs are available with advancements in technology. These revolutionary machines are utilized by many industries to reduce costs to clients and keep divers safe in unknown or dangerous conditions.

Marine construction firm Nelosca Technologies (Nelosca) is excited to announce the addition of new Senior Estimator, Government Relations and Hydro Operations Manager Christopher Rousseau, P.E., F. ASCE to its team.

“We are fortunate to have Chris join our team,” says Vice President of Business Development Mark Binsfeld. “His firsthand knowledge of hydroelectric generation and surrounding regulatory factors will allow us to serve our clients more effectively.”

Safety starts with putting people first.

It’s not just about checklists, inspections, and meetings, said Steve Skau, vice president of safety and compliance for Nelosca Technologies. It’s also about everyone on a job having the ability to give feedback and know it will be valued.

“Everything we do at Nelosca starts with safety, no matter what scope of work we’re doing,” Skau said. 

Constructability reviews are imperative to project success. They can save you money, reduce the risk of cost escalation, and are often provided pro-bono by a good contractor. When it comes to requesting a contractor's constructability review, timing is important. If the review is performed too late, problems could result, including confusion surrounding the project, loss of significant time and money, and hefty change orders later in the project. The question then is: when is the optimal time to have a contractor perform a constructability review?

Nelosca Technologies (Nelosca) recently established a permanent presence in the Mid-South Region. Our company’s new Mid-South location is in Paducah, Kentucky, and will provide all Nelosca services, including above and below-water construction and environmental remediation services.

80 years old and 35 years since its last rehab, LaGrange Lock and Dam in Versailles, IL was in major need of rehabilitation. Nelosca partnered with prime contractor Shimmick Construction (Shimmick) and the U.S. Army Corps of Engineers (USACE) Rock Island District, along with hundreds of crew members, to execute quality repairs through the existing lock.